Newsletter

Saga Servo Stencil Cutter SG-1350P Maximize

Saga Servo Stencil Cutter SG-1350P

Saga Servo Stencil Cutter SG-1350P for cutting vinyl or paper stencils. Typically used for cutting garment stencils out of paper, stencil cutters have the ability to cut completely through the material.

More details

$2,600.00

Stencil cutters are capable of cutting completely through materials such as paper and vinyl.

Saga stencil cutters are equipped with automatic paper feeding and a dual knife cutting carriage.

Use with the Saga GPPC Output Center Professional Plug-In (works on PC only) which is included and can be download from the downloads page. Also highly recommended for use with DragonCut cutting software.

The cut paths sent to stencil cutters typically leave small webs of material to hold the stencil in place as it moves along the roll. When the stencil is complete, these small webs can then be cut with a small knife to remove the stencil from the main roll of material.

Special order from Saga CNC in China.

  • Motor: Servo
  • Maximum Cutting Width (mm): 1150
  • Maximum Media Width (mm): 1350
  • Measurements (cm): 160 x 41 x 34
  • Gross Weight (kg): 49
  • Net Weight (kg): 45
  • Feed System: Automatic Media Feeding
  • Construction: Aluminum Alloy, ABS End Caps
  • Maximum Drawing Speed (mm/s): 1200
  • Maximum Cutting Speed (mm/s): 1000
  • Control System: Servo Motor
  • Power (w): 120
  • Tracking: 5
  • Maximum Force (g): 750
  • Maximum Force Increment (g/step): 3
  • Mechanical Resolution (mm/pulse): .01254
  • Connections: RS-232, USB
  • Power Supply: AC 110V-240V / 50-60HZ 6A
  • Maximum Noise (dB (A)): 35
  • Ambient Temperature Range °C: 5 - 35
  • Command Language: HPGL
  • Media: Release liner backed materials, magnet, stencil, 80g-300g paper
  • Pen Included: Yes
  • Included Blades: 30°, 45°, 60°
  • Packaging: Machine in innner box, stand in inner box, two inner boxes inside carton box
  • Computer Connection: True USB, no driver needed, direct connection to USB Printer
  • Carriage Type: Dual Knife, Stencil Cutting
  • Contour Cutting: No
  • Straight Line Speed (mm/s): 0 - 1200
  • Curve Speed (mm/s): 0 - 600
  • Motor Speed (RPM): 0 - 3500
  • 0-3000 RPM Time Idle Load (miliseconds): 20
  • 0-3000 RPM Time Working Load (miliseconds): 1200
  • Encoder Signal Physical (line / round): 1016
  • Encoder Signal Logical (line / round): 4060
  • Processor (bits): 64 DSP
  • Processor Flash (M): 32
  • Accuracy (±mm): .01
  • Stand Availability: Upright
  • Standard Warranty: 3 Year Parts And Labor
  • Perf Cut Capable: Yes
  • CE Certification: Yes
  • Color: Black / Black
  • Compatibility PC: XP, Vista, 7-32, 7-64, 8-32, 8-64
  • Compatibility MAC: Yes
  • Software - DragonCut: PC, Mac with BootCamp
  • Software - Plug In Driver: Indirect, PLT file to Output Center, PC only
  • Software - Stencil Cutting: Saga GPPC Output Center Professional Plug-In Included (works on PC only)

No customer comments for the moment.

Write your review

Saga Servo Stencil Cutter SG-1350P

Saga Servo Stencil Cutter SG-1350P

Saga Servo Stencil Cutter SG-1350P for cutting vinyl or paper stencils. Typically used for cutting garment stencils out of paper, stencil cutters have the ability to cut completely through the material.

Write your review